Filter
Top Products
12-2 Troubleshooting
Problem Solution
If you see the DOS prompt
B:\
Type g and press Enter to start the application.
I2 of 5 bar codes do not
scan.
Refer to the
Equipment Manual
for proper scanning
techniques.
Verify that the I2 of 5 bar code scan lengths specified
in the printer configuration are even numbers of
characters.
Troubleshooting Information
If you experience problems using your printer, refer to this section.
If You Receive an Error Message
Any time you receive a message that is not described in this manual, or the
recommended action does not solve the problem, call Technical Support.
Calling Technical Support
Technical support representatives are available Monday through Friday
during regular business hours at 1-800-543-6650. Follow these steps before
you call:
1. Record any error messages that occurred.
2. Try to recreate the problem, if you can.
3. List any changes that have recently been made to the system. Try to
record what you did when the problem occurred.
If these steps do not solve the problem, call Technical Support.