Filter
Top Products
SP / TC / GT
PAGE 19
CENTURY SERIES
Group Assignments
Assigns the group signal to the Left, Right, and or Mono out-
puts.
Group XLR
Turns on the balanced XLR output.
Matrix Pre/Post
Switches the Matrix sends between pre and post-fader settings.
Fader Reverse w/LED
Swaps functions between the Effect Level control and the
group fader; i.e., one becomes the other and vice versa.
Group PFL
Allows for Pre Fader Listening of the Group signal.
Group Peak & Signal LED’s
The red LED indicates that the group signal is within 3dB of
the clipping point.
The green LED constantly displays the level of group signal
activity by varying in intensity.
Group Fader
Controls all post-fader group signal outputs.
EFX Return Scene Mute
Assignments
Assign the EFX return signal to any of the four scene mute
groups. Scene mute combines with the effect’s local mute but-
ton, and actuates the local mute LED.
EFX Return Scene Mute Safe Switch
Disables all selected EFX scene mute assignments. An associ-
ated green LED indicates the return is in a safe state.
Rear Connections
Group Out
This connector carries the post-fader output
signal from the associated group module.
Group Insert
This jack allows for the insertion of an effect
or signal processor into the audio path of the
associated group.
EFX Return
These two connectors allow for effect signals
to be brought back into the board. The 1/4"
TRS jack accepts a balanced or unbalanced
signal at -10 dB level and delivers the signal
to the EFX return section. The female XLR
connector accepts a balanced signal at +4dB
level and delivers the signal to the EFX
return section of the group.
Bus In
This connector accepts a balanced signal at
+4dB level, and then sums it with all the
other signals assigned to the associated
groups.
GROUP INSERT
GROUP OUT
EFX RETURN
-10
+4
BUS IN