Filter
Top Products
GT Master Section
This master section is the control center for most of the GT’s
advanced functions.
Left & Right Meters
Monitors the post-fader output of the Left & Right channels,
and any PFL’d signals, via a ten-segment LED array.
Lamp Dim Control
Controls the intensity of the lighting devices plugged into the
XLR sockets on the light bar.
Talkback Mic Input
Allows for a gooseneck microphone to be plugged in for use
with the talkback system. An additional Talkback Mic Input
jack can be found next to the headphone jack on the front-right
of the console under the arm rest.
Power Indicators
These four LED’s indicate the status of the four types of power
used by Century Series Consoles.
Headphone Jack
Delivers right and left output, unless a PFL switch is
depressed. Whenever any signal is in PFL mode, the head-
phone jack will deliver that signal. An additional headphone
jack is located beneath the hand rest on the right-front part of
the console.
Headphone Level Control
Controls the signal level delivered to the headphone jacks.
L, R & Mono Matrix Sends
Controls level of Right, Left and Mono signals sent to the two
matrices.
Local Monitor Level Control
Controls level of signal delivered to the monitor outputs.
Auxiliary Mutes
Mutes the respective auxiliary signals.
PFL Defeat
Disables PFL function to the local monitor, allowing local
monitor output to function as an additional left/right output.
Dim Switch
This switch introduces a -12 dB attenuation into the local mon-
itor and headphone outputs.
Mono Switch
Switches the local monitor and headphone outputs from their
standard stereo mode to a mono mode.
Stereo Program In Gain
Adjusts the gain of the Stereo Program In signal.
Stereo Program In EQ
Two-band fixed frequency (10kHz and 80Hz) EQ that affects
the Stereo Program In signal.
Stereo Program In Assignments
Assigns the Stereo Program to the associated buses.
Local Monitor Mute
Mutes the local monitor signal output.
Aux Master Controls
Controls final output signal level of the auxiliary outputs.
Aux AFL Switches
Switch the eight auxiliary outputs to After Fader Listening
mode, via normal PFL signal path. AUXes can be monitored as
stereo pairs if both AFL switches are depressed. If only one is
depressed, that AUX is monitored in mono.
External Oscillator Switch
Turns on the internal oscillator or accepts signal from the1/4"
TRS Oscillator input jack.
External Talkback Input Switch
Selects the external talkback input XLR as an input signal to
the talkback section and overrides the Oscillator.
Stereo Program Balance
Adjusts balance of stereo signal from Stereo Program input.
Stereo Program Level
Controls final output signal level of the Stereo Program.
Talkback Level Control
Controls the level of the selected talkback source.
External Talkback Output Switch
Turns on the external talkback XLR.
Stereo Program Mute
Mutes the output of the stereo program.
Stereo Program PFL
Allows Pre Fader Listening of the Stereo Program signal.
Talkback Assignment Switches
Assigns talkback signal to outputs, groups, auxes, or matrices.
Blend Level
Controls level of L & R signal blended to assigned auxes.
Blend Assignment Switches
Assigns the Left and Right signals to the respective auxes.
Talkback On/Off Switch
Turns the talkback system on and off, and dims local monitor,
whether or not Dim switch has been pushed.
Matrix Master Levels (A&B)
Controls the final output level of the respective matrix.
Matrix Master Mutes (A&B)
Mutes the respective matrix signal.
Matrix Master PFL (A&B)
Allows Pre-Fader Listening of the respective matrix signal.
Scene Mute Master Switches
Turn on and off the four scene mutes.
Aux Scene Mute On/Off Switch
Turns the Aux Scene Mute system on and off.
L/R/Mono Mute Switches
Mute outputs of Left, Right and Mono signals respectively.
(Continued)
SP / TC / GT
PAGE 25
CENTURY SERIES