Filter
Top Products
10 C1692M (12/05)
Move the Front Cross-Brace
1. Unscrew and lift out the front cross-brace (found at the center of the unit). Moving this part out of the way will make
it easier for you to access the hard drive mounting baskets.
a. Use a Phillips-head screwdriver to remove the two flat-head screws that secure the front cross-brace. Refer to
Figure 6.
Figure 6.
Removing Front Cross-Brace
WARNING:
Do not disconnect the wires or remove the front cross-brace entirely from the unit—doing so may
cause damage to the fan’s power connection.