Pelco C1692M Computer Drive User Manual


 
C1692M (12/05) 5
Getting Ready
1. Familiarize yourself with the instructions throughout this manual.
2. Check that you have all the necessary parts and tools. Refer to the Parts List and Tools Needed sections.
3. Shut down the DX8000 Series DVR unit. Refer to DX8000 Installation Manual or Operations and Programming
Manual for instructions on shutting down your unit.
4. Unplug the power cord from the wall socket and then from the rear of the DVR.
Figure 1.
Removing Power Cord from Wall
Figure 2.
Removing Power Cord from Unit
WARNING:
For safety reasons, you must remove the power cord because current continues to flow through
the DX8000 even when the unit is off. Remove the power cord from the wall socket first and then from the rear
of the DVR. It is critical that the unit be unplugged for your safety.