Filter
Top Products
12 C1692M (12/05)
Disconnect the Data and Power Cables
The system drive is always the first drive next to the CD-RW/DVD drive. When removing the data and power cables, pull
the connectors straight out. Do not rock connectors back and forth or remove a cable by pulling it by its wires or cable.
1. Remove the IDE data cable from the existing system drive as follows:
a. Carefully pull the plastic tab of the connector away from the hard drive. Refer to Figure 8.
b. If a second hard drive is installed in the basket, remove the IDE cable from the second drive.
Figure 8.
Removing the IDE Data Cable
CD-RW/DVD DRIVE
SYSTEM DRIVE
IDE CONNECTOR
1a