Filter
Top Products
20 C1692M (12/05)
RECONNECT THE DATA AND POWER CABLES
IMPORTANT:
Data and power cable connectors fit together only one way. All connectors are keyed to ensure that they
are inserted in the proper orientation. Examine the drive, motherboard, and cable connectors before installation so that
connectors are properly aligned. Make sure connectors are seated in the mating connectors securely, but do not force the
connection. When installing drive power cables, push the connectors straight in or out; do not rock connectors back and
forth.
To reconnect the data and power cables:
1. Connect the IDE cable to the newly installed system drive. Refer to Figure 16.
2. If a second hard drive is in the drive mounting basket, connect the IDE cable to the second drive.
Figure 16.
Installing the IDE Data Cable
3. Connect the system drive power connector according to the diagram in Figure 17. If a second drive is in the drive
mounting basket, reconnect its power connector.