Filter
Top Products
16 C698M-A (6/04)
Figure 8. Associated Programming Configuration Using Eight Data Hubs
POWERING UP AND SYSTEM OPERATION STATUS
When you apply power to the data hub or press the reset button, the front panel indicators provide
information about the data hub’s configuration. The information is flashed on hub data port
indicators 1-7 in the following order:
1. All data port indicators light to show a system reset occurred.
2. System revision is displayed through the numbered hub data port indicators that are lit.
3. The indicator for each data port lights to show that port has received the proper configuration
from the DX2000 DVR.
During normal operation, the data hub transmits a status message to the DX2000 DVR every three
seconds. The HUB/PORT OUT transmit indicator lights during each status message.
The reset button functions like disconnecting the power cord. You can press the button if for some
reason you want the unit to restart. Data will not be recorded until the unit completes its self test.