Filter
Top Products
C698M-A (6/04) 9
INSTALLATION
Refer to the connection diagrams in the
Installation and Programming Examples
section. They help
illustrate and clarify the connection process.
CONNECTING POS TERMINALS TO THE DATA PORT INPUTS
POS terminals with RS-232 output ports are connected to the data hub using the DX2000 data
adapters (DX2000DA9 or DX2000DA9T for DB9 connectors and DX2000DA25T for DB25 connec-
tors). Connect the data adapter to one of the data ports on the data hub using RJ-45 or RJ-11 cable.
Refer to the DX2000 Data Adapters Installation/Operation Manual (C697M) for detailed connection
information.
POS terminals without RS-232 output ports are connected to the data hub using the personality
interface module (PIM). Connect the PIM to one of the data ports on the data hub using RJ-45 or
RJ-11 cable. Refer to the ICI1000PIM Installation/Operation Manual (C1005M) for POS devices
supported and detailed connection information.
CONNECTING ATMS TO THE DATA PORT INPUTS
• SNA Network Connection
Connect the customer’s SNA network to the data hub using the DX2000DA25T Data Adapter.
Connect the data adapter to one of the data ports on the data hub using RJ-45 or RJ-11 cable.
Refer to the DX2000 Data Adapters Installation/Operation Manual (C697M) for detailed
connection information. (Refer to Figures 6 and 7.)
• ATM RS-232 Output Port Connection
Connect ATMs with RS-232 output ports to the data hub using the DX2000 data adapters
(DX2000DA9 or DX2000DA9T for DB9 connectors or DX2000DA25T for DB25 connectors).
Connect the data adapter to one of the data ports on the data hub using RJ-45 or RJ-11 cable.
Refer to the DX2000 Data Adapters Installation/Operation Manual (C697M) for detailed
connection information. (Refer to Figure 5.)