Pelco WLV2500 Webcam User Manual


 
14 Pelco Manual C914M (7/96)
Impedance: 75 ohms
Connectors: BNC
RF (WLV500)
Transmitter
Radiated Power: FCC Part 15 (15.249)
Transmit Antenna: Attached, circular-polarized,
patch antenna
Receive Antenna: Removable, 11 dBi, circular-
polarized, patch antenna
Receiver Connector: TNC
Receiver Input
Impedance: 50 ohms
Frequency Range: 2400 to 2483 MHz
Operating Frequencies
(Factory Set):
WLV500KTE-1L 2481 MHz
WLV500KTE-3R 2402 MHz
Modulation: Wideband FM
Frequency Stability: ±0.005%
TRANSMITTER (WLV2000)
Operating Frequencies
(Factory Set):
WLV2000KTE-1R 2421.5 MHz
WLV2000KTE-3L 2461.5 MHz
Transmitter Power: FCC Part 15 (15.249)
Frequency Stability: ±0.01%
Modulation: FM
Video Input: 1.0 volt P-P, 75 ohms
NTSC, PAL, SECAM (Color)
EIA-170 (B &W)
EIA-330 (CCTV)
Audio Subcarrier: 6.5 MHz above video fre-
quency
Audio Input
Impedance: 600 ohms
Maximum VSWR: Open and short-circuit pro-
tected, all phases
Transmit Antenna: Attached circular polarized
patch antenna with 90° trans-
mission path
Connectors:
Video Input BNC
Audio Input BNC
RECEIVER (WLV2000)
Operating Frequencies
(Factory Set):
WLV2000KTE-1R 2421.5 MHz
WLV2000KTE-3L 2461.5 MHz
Frequency Stability: ±0.01%
Video Output: 1.0 volt P-P, 75 ohms
NTSC, PAL, SECAM (Color)
EIA-170 (B &W)
EIA-330 (CCTV)
Image Rejection: 30 dB minimum
RF Input
Impedance: 50 ohms
Audio Output
Impedance: 600 ohms
Receive Antenna: Detachable, polarized, 11 dBi
Connectors:
Video Output BNC
Audio Output BNC
Antenna TNC
AUDIO (WLV2000)
Frequency Response: 100 Hz to 15 KHz
Level: 1V p-p
Impedance: 600 ohms
Connector: BNC
Pre-Emphasis/
De-Emphasis: 75 microseconds