Perle Systems 5500208-43 Server User Manual


 
Set IOChannel
87 IOLAN DS1/TS2 CLI Reference Guide, Version 4.3
Set IOChannel Multihost
Description Configures up to 49 hosts/IOLANs that the Digital input channel or input serial signal
pins (DSR, DCD, or CTS-when the line is configured for signal-io) will connect to. To
see a list of configured hosts/IOLANs, enter the
show iochannel <channel>
command.
User Level Admin
Syntax
Options <channel>
entry
delete
Deletes the entry number in the multihost table.
host
<tcp_port>
Show IOChannel Status
Description Shows the I/O channel status for all channels and the serial signal pins (when the line is
configured for signal-io).
User Level Admin
Syntax
Kill IOChannel
Description Kills the I/O channel.
User Level Admin
Syntax
Options i/o_channel
Specify the channel number, for example, d2 or a4. Temperature models use Analog
input, so the channel numbers are a1-a4.
rts|cts|dtr|dsr|dcd
Specify the Digital output pins (RTS or DTR) or Digital input pins (CTS, DSR, or
DCD).
set iochannel <channel> multihost entry <number> delete
set iochannel <channel> multihost entry <number> host <host_name>
<tcp_port>
Specify the Digital input channel or input serial signal pin that will be connecting to all
the hosts/IOLANs in the multihost list.
Specify the multihost table entry number. Valid values are 1-100.
Specify the preconfigured host that will be in the multihost list.
Default: None
Specify the TCP port that the I/O channel or serial signal pin will use to communicate
to the
Host.
Default: 0
show iochannel status
kill iochannel <i/o_channel>
kill iochannel line <number> rts|cts|dtr|dsr|dcd