Filter
Top Products
I/O Channel Control Commands
89 IOLAN DS1/TS2 CLI Reference Guide, Version 4.3
I/O Channel Control Commands
The I/O commands in this section are used to manually manage the I/O channels.
Digital Output
Description Manages the Digital output channel status. Not all models have four digital channels,
most have just two.
User Level Admin
Syntax
Options alarm
latch-input
Digital Input
Description Manages the Digital input channel status.
User Level Admin
Syntax
Option output
Manually deactivates the I/O channel.
Relay
Description Manages the Relay output channel status.
User Level Admin
Syntax
Option output
Manually deactivates the I/O channel.
Analog Input
Description Manages the Analog input channel status.
User Level Admin
Syntax
Options alarm
min
max
iochannel d1|d2|d3|d4|cts|dsr|dcd clear alarm|input-latch
Clears the alarm. Note that if the condition that tripped the alarm still exists, the alarm
will not look like it’s cleared, but will reflect the appropriate alarm level severity.
Alarm Level 0 means that the alarm has not been triggered.
Clears the latch value.
iochannel d1|d2|d3|d4|rts|dtr output activate|deactivate
iochannel r1|r2 output activate|deactivate
iochannel a1|a2|a3|a4 clear alarm|min|max
Clears the alarm. Note that if the condition that tripped the alarm still exists, the alarm
will not look like it’s cleared, but will reflect the appropriate alarm level severity.
Alarm Level 0 means that the alarm has not been triggered.
Clears the minimum value.
Clears the maximum value.