Filter
Top Products
A470e Users Guide
Pertech® 2006
13
Serial Number: ********
Main Firmware
Revision: * ** ***
CRC ****
Boot Firmware
Revision: * ** ***
CRC ****
Printer Control Language
PCL: A470 Language
Diag Mode: Standard Print
Auto LF: CR=CR
Font:
Char/Line: 40
Intl Char Set: USA
Code Page: 437 USA
Receipt LPI: 6 Lines Per Inch
Validation LPI 6 Lines Per Inch
RS232 Serial (when used)
Baud Rate: 9600
Data Bits: 8 Bits
Stop Bits: 1
Parity: None
Flow Control: Hardware
USB (when used)
Descriptor: Model Number
Hardware
Mechanism Model: A470e-48X1
LED Usage: Status/Slip
Validation Clamp: Closed
Paper Low Sensor: Enabled
Paper Out Sensor: Disabled
Paper Low Stop Print: Disabled
Memory
Installed RAM: 128K
Installed ROM: 512K
Logo/Font Storage: 128K
Tallies
Printed Lines: xxxxxx
Hours On; xxxxxx
Flash Updates: xxxxxx
Cover Opens: xxxxxx
Diagnostic:
0 0 0
=================================
Press paper feed to change conguration
SET-UP INSTRUCTIONS
PRESSING THE PAPER FEED BUTTON WHILE
THE GREEN LIGHT IS FLASHING WILL REJECT
THE LAST PRINTED PARAMETER. IF THE BUT-
TON IS NOT PRESSED WITHIN 5 SECONDS. THE
PARAMETER WILL BE ACCEPTED AND THE NEXT
SET-UP OPTION WILL BE LISTED.
PRESS THE PAPER FEED BUTTON NOW TO
REJECT THE CURRENT CONFIGURATION AND
CONTINUE WITH THE PRINTER SET-UP.