Philips 190G6 Computer Monitor User Manual


 
Product Information
3.3. 2. Equalizer Tab
The Equalizer (EQ) controls the frequency response of the system by increasing or decreasing the frequency
response of ten independent frequency bands.
This Equalizer works very much the same as the equalizers in high quality sound systems. Each slider controls
the relative level of a band (range) of frequencies. The number listed above each slider column is the center
frequency of the band controlled by that slider. When a slider is set to the center position, frequencies within
this band left flat and the gain is 0dB. See Figure 7.
To boost the level of a given band, move its slider above the centerline. To cut the relative level of a given
band, move its slider below the centerline. Maximum boost or cut is ± 12dB on each frequency level.
Sliders can be individually centered by right clicking anywhere within the slider area, or collectively by clicking
the Reset button on top right corner of the panel. Clicking the default button on the compact panel can also
collectively center the sliders. Please note that the default button resets several other features as well.
3.3.3. Setup Tab
Speaker Test Utility
The Speaker Test Utility can be used to verify that speakers and/or headphones are operating properly.
file:///D|/My%20Documents/dfu/190G6/english/190g6/product/product.htm (13 of 20)2005-08-23 1:18:41 PM