Filter
Top Products
Connecting to Your PC
(1) Connect an S-Video cable to the S-VIDEO jack of the other equipment (DVD Player,
Camcorder, etc.) and to the S-VIDEO jack on the rear of the display.
(2) Connect RCA-style audio cables (usually red and white) to the AUDIO OUT (left and right)
jacks on the other equipment. Connect the other end of the cables to the AUDIO jack on the
side of the display.
(3) Plug the DC Adapter into the DC IN 16V jack on the display. Plug the power cable into an
outlet. Turn on the display and other equipment.
(4) Press the OSD buttons until S-Video appears on the screen.
(5) Press PLAY on the other equipment to view its material on the display.
Component (HD) Connections
Component Video input provide the highest possible color and picture resolution in the playback of
digital signal source material, such as with DVD players. If you are using a HD (High Definition)
receiver that can transmit high definition programming, the display can accept those signals through
the Component input located on the
bottom of the display.
file:///D|/My%20Documents/dfu/190G6/english/190g6/install/connect.htm (5 of 12)2005-08-23 1:19:24 PM