Filter
Top Products
Connecting to Your PC
(1) Connect the Cable TV signal to the IN jack (or RF IN or CABLE IN) on the Cable Box.
(2) Connect an RF coaxial cable (not supplied) to the OUT jack (or TO TV or RF OUT) of the
Cable Box.
(3) Connect the other end of the coaxial cable to one end of the supplied L-Adapter as shown,
and connect the other end of the adapter to the TV jack on the LCD TV.
(4) Plug the DC adapter into the DC IN 16V jack on the LCD TV. Plug the power cable into an
outlet and switch TV set on.
(5)
Set the Channel 3/4 (or Output channel) switch of the Cable Box to 3 or 4. Set the TV to
the same channel. When watching TV programming, change channels at the Cable Box,
not the LCD TV.
Helpful
Hint
● Immediately after unpacking and plugging in your new television, run the auto
program function to set up the TV for the broadcast or cable channels available in
your area. If you do not run the auto program function to set up the channels , your
television may not
operate properly.
● Please make sure that you have selected the TV mode with AV+ key
on your remote control, before installing TV channels.
Cable Box (with Audio/Video outputs)
This connection will supply stereo sound to the LCD TV.
file:///D|/My%20Documents/dfu/190G6/english/190g6/install/connect.htm (8 of 12)2005-08-23 1:19:24 PM