Filter
Top Products
Connecting to Your PC
4)Connect to PC
(1) Turn off your computer and unplug its power cable.
(2) Connect the monitor signal cable to the video connector on the back of your computer.
(3) Plug the power cord of your computer and your monitor into a nearby outlet.
(4) USB plug
(a) Connect USB upstream port on monitor and the USB port on PC with a USB cable.
(b) The USB downstream port is now ready for any USB device to plug in
(5) Turn on your computer and monitor. If the monitor displays an image, installation is
complete.
Note: The USB plug is a pass through connection whether it can support USB 1.1 or USB 2.0
depends on your PC's specification.
5)Connect for AV functionality (Europe Only)
SCART Connentions
This connection will supply stereo sound to the display.
file:///D|/My%20Documents/dfu/190G6/english/190g6/install/connect.htm (3 of 12)2005-08-23 1:19:24 PM