Filter
Top Products
20
®
®
®
®
x
Select (CBL VCR DVD SAT AMP) and Backlight
Press this button to cycle across the accessory mode dial. Stop pressing
when the mode you desire is lighted. The light will stay on for 2 seconds
and then begin blinking to indicate the remote is in your desired mode.
As long as the button blinks, the remote is in the accessory mode. (See
pages 22–25 for programming the remote) Pressing and holding the
Select button for 2 seconds backlights the remote control buttons. The
buttons remain lighted for 5 seconds after you press Select.
Source
Press to display a list of source options—TV, AV1, AV2, AV3, AV4, AV5,
AV6, or Side. Use the Cursor Up/Down buttons to select the next item,
then press the OK button to confirm or press the Source Select button to
select the next item in the list.
Alternate Audio (SAP)
When you tune to a channel where SAP (Second Audio Program) is
available, you can toggle between Main and SAP. If SAP is not available,
only Main can be selected. (See page 42 in the Directions for Use manu-
al.)
Pixel Plus™ Demo
Press to activate the demo, which illustrates the benefits of Pixel Plus™.
Press again to turn the demo off. Press and the TV screen will be divided
in half displaying the Pixel Plus™ Demo. The left side will show the pic-
ture with Pixel Plus™ switched off. The right side of the screen will
show the picture with Pixel Plus™ switched on. (See page 30 in the
Directions for Use manual.)
OK
Press to activate or confirm menu choices.
Freeze Format
Pressing will apply one of the Freeze modes you set using the on-screen
menu. See page 60 in the Directions for Use manual.
Freeze mode stops action in the main screen. Sound will continue to
be heard. Press again to resume normal viewing.
Replay mode displays a few seconds of stored video in the PIP win-
dow.
Photo Finish mode displays six stored frames from the picture.
NOTE: Continuing to hold the Freeze Format button down will cycle the
TV through the Freeze modes: Freeze, Replay, and Photo Finish.
VOL (Volume)
Press + or – to adjust the volume.
Mute
Press to interrupt or restore sound.
Information Plus
Press to show information (when available) about the current channel,
program, source, number or name, local time, CC availability, SAP avail-
ability, program ratings, display format, sound mode, and remaining
length of a Sleeptimer setting.
Dual Screen/PIP (Picture-in-Picture)
Press to turn the PIP dual screen on or off. Continuing to hold the Dual
Screen/PIP button down will cycle through the Dual Screen/PIP options.
(See page 58 in the Directions for Use manual.)
Active Control, AutoSurf, Incredible Surround, and Pixel Plus are trademarks of Philips Consumer Electronics. Copyright 2003 Philips Consumer Electronics. All
rights reserved.
*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Remote Control Buttons