Filter
Top Products
>
1 Press the y Standby button to switch on the projector.
– The Standby indicator starts blinking green.
– When the projection lamp is on, the Standby indicator lights up green and the start-up
screen (when enabled) appears for several seconds.
2 Select the required source (Multimedia,YPbPr, RGBsync, RGsogB, S-Video,Video) by pressing
the Source button (LC 6285) or the appropriate button on the remote control (LC 6281).
– The sources that can be selected are shown on the screen.
• The required source can also be selected via the ‘Source’ option in the ‘Set up’ menu of the
On Screen Display (OSD) menu.
When only one input source is connected, this source will automatically be selected (Auto Source).
When more input sources are connected, the source with the highets priority will be selected
(Multimedia,YPbPr or RGsogB, RGBsync, S-Video,Video). Source selection can be changed in the Set up
menu.
3 Switch on the computer or start video playback.
– A feedback message appears on the screen, indicating the selected source.
Direct key feedback
Direct key feedback is given when settings/adjustments are made directly via the remote control or
local keyboard. Feedback is given by means of a slider, a simple dialog or a list of options.
Sliders are used when setting e.g.:
– volume;
– picture size;
– vertical keystone;
– brightness;
– contrast;
– colour tracking.
Dialogs are used when setting e.g.:
– horizontal/vertical keystone;
– mirror;
– child lock.
Lists are used when setting e.g.:
– smart picture;
– picture format;
– source.
General
Note
Messages
Philips Home Cinema Projector 25 English User guide LC 6281 / LC 6285
5. Operation
MENU
PICTURE SIZE – PICTURE SIZE +
VOLUME +
VOLUME –
SOURCE
OK
MENU
PICTURE SIZE – PICTURE SIZE +
VOLUME +
VOLUME –
OK
SOURCE
STANDBY/ON
Preparation
XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 25