Filter
Top Products
<
9 Tighten screws B again.
10 Put the lamp door back in place.
11 Insert the mains lead into both the projector Mains inlet socket and the wall socket.
12 Press the Standby button to switch on the projector.
13 Reset the lamp life time (see ‘Resetting the lamplife time’).
14 Dispose of the old lamp in special chemical disposal bins.
1 Press Menu.
– The menu bar appears on the screen.
2 Use Cursor Control to select Lamp counter in the ‘Set up’ menu.
4 Press OK for 10 seconds to reset the lamp counter.
5 If required, select another item you wish to adjust or press Menu to exit.
Lamp replacement
Resetting the lamplife
time
Philips Home Cinema Projector 38 English User guide LC 6281 / LC 6285
6. Maintenance