Filter
Top Products
9
Control Panels
AC INPUT jack
Connect the AC (120V) power cord here. Plug the
other end into the wall outlet. (Connect the AC
power cord last.)
TEL LINE jack
Connect one end of a telephone cable to this jack.
Connect the other end to the wall telephone jack.
AUDIO (right and left) OUT jacks
Use audio cables to connect the Internet Terminal to
the AUDIO IN jacks on your TV.
KEYBOARD jack
You may connect a personal computer keyboard with
a PS/2 (6-pin connector) to the Internet Terminal. See
page 36 for details.
VIDEO OUT jack
Use a video cable to connect the Internet Terminal to
the VIDEO IN jack on your TV.
S-VIDEO OUT jack
Use an S-VIDEO cable (not supplied) to connect the
unit to the S-VIDEO IN jack on your TV.
RFU jack
Connect an RFU adapter (not supplied) here when you
connect the Internet Terminal to a TV without
Audio/Video jacks.
Infrared sensor
Receives the information from the remote control so
that you can operate your Internet Terminal from a
distance. You must point the remote control at the
Internet Terminal, not the TV.
POWER indicator
Indicates the Internet Terminal power is on.
CONNECTED indicator
This indicator flashes when the Internet Terminal is
connecting to WebTV. It remains lit while the unit is in
use. It also may flash when you try a different feature
or move among sites.
MESSAGE indicator
Indicates that you have a new e-mail message.
Vertical Sliding Door
Allows you to use Smart Card technology when it
becomes available. Accessories may be required.
WebTV port (on the side of the unit)
This port can be used for optional accessories that will
be introduced in the future. The door must be closed
for WebTV to operate. Additional accessories may be
required.
RESET Button
Press this button to reset the Internet Terminal.