Filter
Top Products
3 Enter your new code in the second field by using the 4-directional Cursor Control to select
characters in the selection table and press the OK button to save.The code may consist of
any combination of 4 characters and/or digits.
4 To confirm, also enter your new code in the third field.
5 Click the OK button.
6 Click the Menu button to close this window.
Changing your Security code
1 Click the Security code tab in the main window.
– The Security code window appears with the Characters selection table.
2 Enter your current code in the first field by using the 4-directional Cursor Control to select
characters in the selection table.
3 Enter your new code in the second field.
4 To confirm, enter your new code in the third field.
5 Click the OK button.
6 Click the Menu button to close this window.
Entering the wrong code three times in a row will lock the projector for 30 minutes.
Leave the projector turned on during this time and then unlock as described under ‘Unlocking the
projector after shutdown’. If you turn off the projector before the full 30 minutes have past, it will be
locked again for the remaining time before turning on again.
Note
Philips Multimedia Projector 26 English User guide bCool SV1
5. Operation On Screen Display Menu >