Filter
Top Products
7
En
Installation and Connections
English
■ When using PDA-5003
Input connectors on the plasma
display with video card
Consult the following chart when making connections to a
plasma display equipped with this video card (pages 7 to 16).
*1 Although INPUT1 and INPUT5 are compatible with various
kinds of signals, setup using the on-screen menu is
necessary after connections are made in order match the
characteristics of the source component (pages 18 to 20).
*2 INPUT1 is compatible with Microsoft’s Plug & Play (VESA
DDC 1/2B).
*3 Depending on the video output board of the computer, this
type of connection may not be possible.
*4 INPUT2 is compatible with Microsoft’s Plug & Play (VESA
DDC 2B).
Installation and Connections
■ When using PDA-5004
Input connectors on the plasma
display with video card
Consult the following chart when making connections to a
plasma display equipped with this video card (pages 7 to
16).
Input
Connector
INPUT
1
*1
INPUT
2
INPUT
4
INPUT
3
Analog RGB
Component video
S video
Composite video
Personal computer
(PC)
AV component
Connected
component
and signals
INPUT
5
*1
Analog RGB
S video
Composite video
Digital RGB
*2
*3
*3
*4
Connection to INPUT1 and INPUT5
Various components can be connected to the INPUT1 and
INPUT5 jacks. After connections are made, on-screen
setup is necessary to match the characteristics of the
connected component. Please see pages 18 to 20 for on-
screen setup after connection.
: Do not connect anything. : Connect to this jack.
Note
Components compatible with INPUT1 are also compatible with
INPUT5. When making connections to INPUT1, please refer to
the plasma display’s Operating Instructions.
See Appendixes 1 and 2 (pages 43 to 45) for
information regarding signals and display formats
supported by INPUT1 and INPUT5.
*1 Although INPUT1 and INPUT5 are compatible with various
kinds of signals, setup using the on-screen menu is
necessary after connections are made in order match the
characteristics of the source component (pages 18 to 20).
*2 INPUT1 is compatible with Microsoft’s Plug & Play (VESA
DDC 1/2B).
*3 Depending on the video output board of the computer, this
type of connection may not be possible.
*4 INPUT2 is compatible with Microsoft’s Plug & Play (VESA
DDC 2B).
Connection to INPUT1 and INPUT5
Various components can be connected to the INPUT1 and
INPUT5 jack. After connections are made, on-screen
setup is necessary to match the characteristics of the
connected component. Please see pages 18 to 20 for on-
screen setup after connection.
INPUT5
jack
Output source
[ON SYNC]
GBR
[H/V SYNC]
HD VD
Video component/
personal
computer (PC)
with RGB output
G ON SYNC
R
RG
GBR
B
B
VD
H/V SYNC
HD
Video component
with component
video output
Y Pb/Cb Pr/Cr
Input
Connector
INPUT
1
*1
INPUT
2
INPUT
4
INPUT
3
Analog RGB
Component video
S video
Composite video
Personal computer
(PC)
AV component
Connected
component
and signals
INPUT
5
*1
Analog RGB
S video
Composite video
Digital RGB
*2
*3
*3
*4