Pioneer PDA-5004 Computer Hardware User Manual


 
2
En
Part Names and Functions
English
Before Proceeding
Before Proceeding
How to use this manual
This manual has been written to allow easy
understanding of setup and operating procedures when
the video card PDA-5003/PDA-5004 is installed in the
plasma display.
Remove the video card from its packaging and confirm
that all accessory parts are present. While installing and
setting up the video card, consult the section Part
Names and Functions starting on page 4 of this manual
and in the plasma displays Operating Instructions to
familiarize yourself with the parts of the respective
devices. Since this manual makes frequent reference to
the names of operating buttons on the plasma display,
use the displays Operating Instructions to familiarize
yourself with the controls on the display and the remote
control unit.
The section Installation and Connections starting on
page 6 includes information necessary for installing the
video card on the plasma display, together with
instructions regarding connections to various other
components.
The section System Settings starting on page 18
covers the on-screen settings necessary for correct
operation of the plasma display with its connected
components. Depending on the connections made, this
section may or not be necessary.
The remainder of the sections in this manual is dedicated
to the basic operations associated with selecting a source
component up to the more complex operations
associated with adjusting the plasma display picture to
match the requirements of specific components and
personal preferences.
Regarding menu displays
The example menu displays provided in this manual are
those for the PDP-504CMX/PDP-50MXE1/PDP-50MXE1-S
model. The PDP-434CMX/PDP-43MXE1/PDP-43MXE1-S
display differs as shown:
Please note that the actual contents displayed are the
same for both the PDP-504CMX/PDP-50MXE1/PDP-
50MXE1-S and PDP-434CMX/PDP-43MXE1/PDP-
43MXE1-S.
Example of PDP-504CMX/PDP-50MXE1/PDP-50MXE1-S
Menu Display:
MENU INPUT1
PICTURE SCREEN SETUP OPTION
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
PICTURE RESET
ENTER
SET
EXIT
MENU
:
0
:
0
:
0
:
0
:
0
Example of PDP-434CMX/PDP-43MXE1/PDP-43MXE1-S
Menu Display:
MENU INPUT1
PICTURE SCREEN SETUP OPTION
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
PICTURE RESET
ENTER EXIT
SET
MENU
:
0
:
0
:
0
:
0
:
0
Checking supplied accessories
Check that the following accessories were supplied.
1 Label for remote control unit
PDA-5003
PDA-5004
2 Connector indicator label
PDA-5003
PDA-5004
3 Screws (×2)
(Accessory screws for installing video card)
÷ These Operating Instructions
÷ Warranty
INPUT3
S-VIDEO
VIDEO INPUT3
/
4 ANALOG RGB
(ON SYNC) (H/V SYNC)
IN OUT R L RLGBRHDVD
INPUT4 INPUT5AUDIO
AUDIO
RGB (BNC)
COMPONENT
INPUT3
S-VIDEO
VIDEO
IN OUT
AUDIO
RLRL
AUDIO
RL
AUDIO
RL
COMPONENT VIDEO
Y Pb/Cb Pr/Cr
INPUT4 INPUT5