Filter
Top Products
15
En
Installation and Connections
English
Installation and Connections
Audio connections
Before making connections, be sure to check that the
audio component’s power and the display’s main power is
off.
Connect an audio component to the audio input
jack of the plasma display with installed video
card.
When the video card is installed, the plasma display
provides four or five audio input jacks and one audio
output jack. Consult the following chart to choose the
proper audio input for each video input.
*1
When using the PDA-5003, the INPUT3 and INPUT4
audio input connectors are shared.
Audio connection for component connected to
INPUT1
ANALOG RGB OUT
D-Sub
AUDIO
IN
INPUT1
A stereo miniplug cable can be used to connect the audio
output from the component connected to INPUT1, to the
plasma display’s AUDIO (INPUT1) jack (L/R).
Sound is output from both the AUDIO (OUTPUT) stereo
mini jack (L/R) and the SPEAKER (L/R) terminals according
to the video input selection.
Audio connections for component connected to
INPUT2
DIGITAL RGB
DVI-D
AUDIO
IN
INPUT2
A stereo miniplug cable can be used to connect the audio
output from the component connected to INPUT2, to the
plasma display’s AUDIO (INPUT2) jack (L/R).
Sound is output from both the AUDIO (OUTPUT) stereo
mini jack (L/R) and the SPEAKER (L/R) terminals according
to the video input selection.
Audio connection for component connected to
INPUT5
RL
INPUT5
AUDIO
The audio line for the component connected to INPUT5
can be connected to the AUDIO R/L (INPUT5) pin jacks.
Sound is output from both the AUDIO (OUTPUT) stereo
mini jack (L/R) and the SPEAKER (L/R) terminals according
to the video input selection.
INPUT1
INPUT2
INPUT5
INPUT3
INPUT4
Audio input Sound output
Stereo mini jack (L/R)
Stereo mini jack (L/R)
Pin jacks (L/R)
Pin jacks (L/R)
*1
Pin jacks (L/R)
*1
Sound of the selected video
input is output from the
• SPEAKER (L/R) terminals
• Stereo mini jack (L/R).
Video
input