Filter
Top Products
31
En
Other Operations
English
Other Operations
Setting the orbiter (ORBITER)
At set time intervals (about once every 8 minutes), this
function automatically changes the screen display position
by incremental amounts. The amount of screen movement
is 1 pixel horizontally or vertically.
When displaying a still image, setting [ORBITER] to [ON]
helps prevent the screen from being burnt with a lag image.
÷ This function is not supported when using the POINT
ZOOM function, multiscreen function, or menu display.
MENU
2/3
5/∞
SET
1 Press the MENU button to display the menu
screen.
MENU INPUT1
PICTURE SCREEN SETUP OPTION
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
PICTURE RESET
:
0
:
0
:
0
:
0
:
0
2 Use the 2/3 buttons to select [OPTION].
MENU INPUT1
:
:
ENERGY SAVE
SCREEN MGT.
:
OFF
:
ORBITER OFF
:
MASK CONTROL ON
:
AUTO SET UP MODE INACTIVE
:
AUTO FUNCTION OFF
:
AUDIO OUT FIXED
STANDARD
LANGUAGE ENGLISH
PICTURE SCREEN SETUP
OPTION
3 Use the 5/∞ buttons to select [ORBITER].
MENU INPUT1
:
:
ENERGY SAVE
SCREEN MGT.
:
OFF
:
ORBITER OFF
:
MASK CONTROL ON
:
AUTO SET UP MODE INACTIVE
:
AUTO FUNCTION OFF
:
AUDIO OUT FIXED
STANDARD
LANGUAGE ENGLISH
PICTURE SCREEN SETUP OPTION
3 OFF
ON 2
Side mask position (MASK CONTROL)
When screen size is set to [DOT BY DOT] or [4:3], or when
using multiscreen display, the position of the black stripes
on the side of the screen and the position of the subscreen
are changed slightly each time the power is turned on, in
order to alleviate burning of lag images on the screen.
MENU
2/3
5/∞
SET
1
Press the MENU button to display the menu screen.
MENU INPUT1
PICTURE SCREEN SETUP OPTION
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
PICTURE RESET
:
0
:
0
:
0
:
0
:
0
2 Use the 2/3 buttons to select [OPTION].
MENU INPUT1
:
:
ENERGY SAVE
SCREEN MGT.
:
OFF
:
ORBITER OFF
:
MASK CONTROL ON
:
AUTO SET UP MODE INACTIVE
:
AUTO FUNCTION OFF
:
AUDIO OUT FIXED
STANDARD
LANGUAGE ENGLISH
PICTURE SCREEN SETUP
OPTION
MENU
5/∞
SET
2/3
Display operating panel Remote control unit
4 Press the SET button to activate the setting.
The factory default setting is [OFF].
Each time the button is pressed, the setting alternates
as follows:
5 When finished with the setting, press the MENU
button to return to the normal screen image.
Note
The [ORBITER] setting affects all input sources.
MENU
5/∞
SET
2/3
Display operating panel
Remote control unit