Filter
Top Products
Appendix A • Control Panel Menus
A-8 Pitney Bowes DA500/DA550 Operator Guide
1. Address
Layout
(continued)
B. Distance to Bottom (Bottom Margin)
Use this option to set the distance from the top address
line to the bottom of the envelope. For #10 envelopes
this should be about two inches.
Press the + or – buttons to increase or decrease the
Distance to Bottom, (+ MORE or – LESS) defined in
inches or millimeters. The bottom margin is the distance
between the bottom edge of the material and base of first
line of the address. Minimum distance between the last
line of the address and the bottom edge of the material is
5/8 inches. If less than 5/8 inches, the lower right
barcode will not be printed. Press the Enter button to
enable the desired measurement.
C. Line Spacing
Press the + or – buttons to increase or decrease the Line
Spacing (i.e., 3, 4, 6, 8 lines/inch or Automatic), defined in
lines per inch. Automatic line pitch selection is based on
industry-standard definitions for line spacing for each
print pitch and style selected. The printer will automati-
cally select the correct setting for the font and size of the
characters being printed.
D. Orientation
The choices are Normal and Inverted. Select Normal for
most applications. This tells the printer that the bottom
edge of the material feeds first, with the right side running
against the right side of the printer.
The Inverted option tells the printer that the top edge of
the material feeds first. Select this option if, for example,
you need to feed envelopes flap first.