Pitney Bowes DM800i Series Postal Equipment User Manual


 
DM800i™ Series Digital Mailing System Operating Guide
SV61162 Rev. D 4-11
Mode Selection:
Key in Postage
Use this mode if you know what the correct amount of postage is for your
mail and you intend to apply this postage to each piece.
1. Press the Mode key.
2.
Select Key In Post
age.
3. Key in the correct postage value using the numeric keys on the
IntelliLink® Control Center, then press the Enter key.
4. If you are done, place the mail on the feed deck and press the Sta
rt
key, otherwise go to step 4.
5. If you want to change the date, add or change an advertisement or
inscription, pre
ss the Menu key and select Meter Stamp Options. For
more information, refer to “Selecting the Meter Stamp Options” in this
chapter.
6. When finished, place the stack of mail or piece of mail on the feed deck
and press the
Start key.
7. If you are using the optional DJPS/DMPS Power St
acker, we recom-
mend you remove your mail in manageable stacks and not allow the
deck to
fill completely. The system will halt the stacker if it is filled to its
maximum capacity.
Mode Selection:
WOW® - Weigh-
On-The-Way®
This feature is available only on systems that have the optional
Weigh-On-The-Way® (WOW®) module installed.
WOW® feature increases your productivity by weighing the piece of mail
an
d applying the correct postage as it travels through the mailing machine.
To run mail in the WOW® mode:
1. Press the Mode key.
2. Select WOW - Weigh o
n the Way.
3. Press the Class
key and select the class. For more information, refer to
“Selecting the Class, Carrier, Special Services
or Options” in this chap-
ter.
4. Press the Seal key and se
lect your sealing option.
5. Place the stack of mail on the feed deck.
6. Press the Sta
rt key.
7. If you are using the optional DJPS/DMPS Power St
acker, we recom-
mend you remove your mail in manageable stacks and not allow the
deck to
fill completely. The system will halt the stacker if it is filled to its
maximum capacity.
WARNING! Do not lean on or disturb the system while it is process-
ing mail in this mode. It will affect the amount of posta
ge applied to
the mail piece.