Filter
Top Products
DM800i™Series Digital Mailing System Operating Guide
SV61162 Rev. D 5-21
Timeouts:
Normal Preset
Timer
The normal preset timer option allows you to specify how much time you
want to allow the system to remain idle before it returns to the Normal Pre-
set settings (refer to Def
ine Presets section in this chapter for more infor-
mation on Normal Presets).
You can set this timeout for 0 - 1440 minutes, in 1 minute increments. The
de
fault
timeout is 30 minutes.
1. Press the Menu
key and select Set Up.
2. Select Basic Settings and th
en Timeouts.
3. Select Normal Pres
et Timer.
4. To set the timer, enter the number of minutes (0-1440) using the
numeric keybo
ard.
5. If you want the system to stay at the last settings used, select Never
reset to Norm
al Preset.
6. Press the Enter key.
Timeouts:
Feeding Timeout
Use this option to specify how much time to allow before the feeder stops
after the last envelope is processed.
You can set this timeout for 5 - 90 seconds, in 1 second increments. The
de
fault
timeout is 5 seconds.
This reduces the wear on your machine and act
s as a safety measure if
you leave the machine unattended.
1. Press the Menu
key and select Set Up.
2. Select Basic Settings and th
en Timeouts.
3. Select Feeding T
imeout.
4. Enter the number of seconds (0 - 90) using the numeric keyboard, or
press t
he screen key corresponding to Turn Rollers off Immediately,
or Run Until Stop key is Pressed.
5. If you entered the number of seconds, press the Enter key
.
Timeouts:
Waiting for Env
This option allows you to specify how long the system will continue to feed
mail placed on the feed deck without having to press the Start key.
You can set this timeout for 0 - 90 seconds, in 1 second increments. The
default
timeout is 20 seconds.
1. Press the Men
u
key and select Set Up.
2. Select Basic Settings and th
en Timeouts.
3. Select Wa
iting for Env.
4. Enter the number of seconds (0 - 90) using the numeric keyboard.
5. Press the Enter key.