Filter
Top Products
Content Security Gateway User’s Manual
Step 10. Click Tunnel and press New Entry to configure the further setting.
Step 11. Enter Site_B as the new tunnel name, and select LAN interface as the VPN source. Fill LAN IP
subnet 192.168.20.0 with subnet mask IP 255.255.255.0.
Step 12. In To Destination table, fill company B’s subnet IP and mask, 192.168.10.0 and 255.255.255.0
respectively.
Step 13. In IPSec / PPTP Setting, select VPN_B as the available tunnel.
Step 14. Fill company A’s gateway IP 192.168.10.1 in Keep alive IP to keep VPN tunnel connecting.
Step 15. Click OK to finish the Tunnel setting of Company B.
Step 16. If you want to configure bi-direction VPN connection, you should enable Tunnel setting in Outgoing
- 110 -