Filter
Top Products
Content Security Gateway User’s Manual
IP Address: The private IP address of the Content Security Gateway’s LAN network is the IP address of the
LAN port of the device. The default IP address is 192.168.1.1. If the new LAN IP Address is not 192.168.1.1,
the Administrator needs to set the IP Address on the computer to be on the same subnet as the Content
Security Gateway and restart the System to make the new IP address effective. For example, if the Content
Security Gateway’s new LAN IP Address is 172.16.0.1, then enter the new LAN IP Address 172.16.0.1 in the
URL field of browser to connect to Content Security Gateway.
NetMask: This is the subnet mask of the LAN network. The default netmask of the device is 255.255.255.0.
Ping: Select this to allow the LAN network to ping the IP Address of the Content Security Gateway. If set to
enable, the device will respond to ping packets from the LAN network.
HTTP: Select this to allow the device WEBUI to be accessed from the LAN network.
4.2.2 WAN
Entering the Interface menu
Click on Interface in the left menu bar. Then click on WAN below it. The current settings of the interface
addresses will appear on the screen.
WAN Interface
Using the WAN Interface, the Administrator can sets up the WAN network. These IP addresses are real
public IP Addresses, and are routable on the Internet.
For PPPoE (ADSL User): This option is for PPPoE users who are required to enter a username and
password in order to connect, such as ADSL users.
Current Status: Displays the current line status of the PPPoE connection.
IP Address: Displays the IP address of the PPPoE connection
- 38 -