Filter
Top Products
Content Security Gateway User’s Manual
Authentication Port: The port number used for user login page.
Generally, when user want to access WAN network and the authentication (Policy -> Outgoing) is enabled,
the user only need to open a web page and the User Login page will pop up.
But if user does not need to open the web page and also want to access Internet resource such as FTP, then
the user has to send http request with this port number, and CS-500 will send a User Login page for user to
input user name and password.
For example, if the gateway IP address is 192.168.1.1 and authentication port is 82, user have to open a web
browser and input
http://192.168.1.1:82 on the address file to have the user login page.
Re-Login if Idle: When the LAN users access to WAN network and do not use for a while, the connection will
be time-out. User has to re-login again. The default time is 30 minutes.
Re-Login after user login successfully: You can limit the access time for the LAN user, when time is up
LAN user will need to re-login again. If the time setting sets to 0 that means unlimited. Select Disallow
Re-login if the auth user has login will disable this feature.
URL to redirect when authentication succeed: You can set up the default webpage to force user to access
it first when user passes the authentication.
Messages to display when user login: You can specify a message to display at user’s login page when
user passes the authentication.
4.3.5.2 Auth User
Click Authentication in the menu bar on the left hand side and click Auth User.
- 71 -