Filter
Top Products
- 11 -
Step 3: Secure the brackets tightly.
ached to the Web Smart Switch, use suitable screws to securely attach the brackets to
2-7.
Step 4: Follow the same steps to attach the second bracket to the opposite side.
Step 5: After the brackets are att
the rack, as shown in Figure
Figure 2-7 Mounting the Web Smart Switch in a Rack
Step 6: Proceed with the steps 4 and steps 5 of section 2.3.1 Desktop Installation to connect the network cabling and
supply power to your Web Smart Switch.
he sections describe how to insert an SFP transceiver into an SFP slot.
The SFP transceivers are hot-plug e and hot-swappable. You can plug-in and out the transceiver to/from any SFP port
e Figure 2-8 appears.
2.3.3 Installing the SFP transceiver
T
without having to power down the Switch. As th
Figure 2-8 Plug-in the SFP transceiver
Approved PLANET SFP Transceivers
PLANET Web Smart switches support both single mode and mu he following list of approved
LANET SFP transceivers is correct at the time of publication:
ransceiver )
■
■
lti mode SFP transceiver. T
P
■MGB-SX SFP (1000BASE-SX SFP t
■MGB-LX SFP (1000BASE-LX SFP transceiver )
MFB-FX SFP (100Base-FX SFP transceiver - 2Km)
MFB-F20 SFP (100Base-FX SFP transceiver -20Km)