Filter
Top Products
- 44 -
4.9 Access Control List
The Access Control List (ACL) is a concept in computer security used to enforce privilege separation. It is a means of
determining the appropriate access rights to a given object depending on certain aspects of the process that is making
the request, principally the process's user identifier. Access Control List (ACL) is a mechanism that implements access
control for a system resource by listing the identities of the system entities that are permitted or denied to access the
resource. The screen in following screen appears; table 4-5 descriptions the Access Control List of Web Smart Switch.
Figure 4-48 Access Control List (ACL) Web Page screen
Table 4-5 Descriptions of the Access Control List (ACL) screen Objects
Object Description
Group id
Input a group ID and available range is 1-255.
Action
To assign “Permit” or “Deny” for Access Control List, the screen in Figure 4-49 appears.
VLAN
To choose VLAN type as “Any” or by “VID (1-4094)”, the screen in Figure 4-50 appears.
Packet Type
To choose Packet type as “IPv4” or by “Non-IPv4”, the screen in Figure 4-51 appears.
IP Fragment
To decide to “check” or “Uncheck” the IP fragment, the screen in Figure 4-52 appears.
L4 Protocol
Provide additional L4 protocol for security on Layer 4 level, the screen in Figure 4-53 & 4-54 & 4-55
appears.
Current List
Display “IPv4” or “Non-IPv4” ACL groups, maximum up to 16 groups and the screen in Figure 4-56
appears.
Add button
Press this button for add Access Control List group on Web Smart Switch, the screen in Figure 4-57
& 4-58 appears.
Del button
Press this button for delete Access Control List group on Web Smart Switch, the screen in Figure
4-59 to 4-60 appears.