Filter
Top Products
- 8 -
2. HARDWARE DESCRIPTION
This product provides three different running speeds – 10Mbps, 100Mbps and 1000Mbps in the same Web Smart Switch
and automatically distinguishes the speed of incoming connection.
This section describes the hardware features of Web Smart Switch. For easier management and control of the Web
Smart Switch, familiarize yourself with its display indicators, and ports. Front panel illustrations in this chapter display the
unit LED indicators. Before connecting any network device to the Web Smart Switch, read this chapter carefully.
2.1 Front Panel
The Front Panel of the Web Smart Ethernet Switch consists of 24x Auto-Sensing 10/100Mbps Ethernet RJ-45 Ports, the
FGSW-2402VS provide two open slots can be installed by optionally two of 1000Base-T port, 100Base-FX, or
1000Base- SX/LX fiber-optic interfaces. The FGSW-2620VSF provides 2 Gigabit TP/SFP combo ports either can be
1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX through SFP (Small Factor Pluggable) interface. For the Fiber
switch FGSW-2624SF, it provides 24 100Base-FX Fast Ethernet ports and 2 Gigabit TP/SFP combo ports.
The LED Indicators are also located on the front panel of the Web Smart Switch.
Figure 2-1: FGSW-2402VS Switch front panel
Figure 2-2: FGSW-2620VSF Switch front panel
Figure 2-3: FGSW-2624SF Switch front panel
2.1.1 LED indicators
System
LED Color Function
PWR Green Lights to indicate that the Switch has power.
Per 10/100Mbps port
LED Color Function
LNK/ACT Green Lights to indicate the link through that port is successfully established.
100 Orange Lights to indicate the port is running in 100Mbps speed.