Filter
Top Products
- 17 -
Figure 4-5 Port Configuration Web Page screen
Table 4-2 Descriptions of the Port Configuration screen Objects
#Remark:
InRate/OutRate setting are only for Fast Ethernet
Port.
Object Description
Port
Indicate port 1 to port 26.
Enable
Per port Disable or Enable on Web Smart Switch.
Auto
Per port Disable (Off) or enable (On) Auto negotiation on Web Smart Switch.
Spd/Dpx
Adjust per port speed duplex mode on Web Smart Switch; the available options are Auto, 100F,
100H, 10F, 10H. Default mode is
Auto.
Flow Control
Per port Flow control Disable (Off) or enable (On) on Web Smart Switch. Default mode is On.
InRate*
Input the value of packet rate sent from the connected port to this port must enable the flow control
feature of this port for the function to work normally. The available value ranges from 1 to 99 and rate
unit: 1Mbps.
OutRate*
Input the value of packet rate sent from this port to the connected port. The available value ranges
from 1 to 99 and rate unit: 1Mbps.
Apply button
Press this button for save current configuration of each port on Web Smart Switch.