FGSW-2620VM / FGSW-2624SF User’s Manual
3.3 Preparing for Web Management
The following shows how to start up the Web Management of the Managed Switch. Note the FGSW Managed Switch is
configured through an Ethernet connection, please make sure the manager PC must be set on the same IP subnet
address.
For example, the default IP address of the FGSW Managed Switch is 192.168.0.100, then the manager PC should be
set at 192.168.0.x (where x is a number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
Figure 3-1 IP Management diagram
3.4 System Login
1. Use Internet Explorer 6.0 or above Web browser, enter IP address http://192.168.0.100 (the factory-default IP
address or that you have just changed in console) to access the Web interface.
2. When the following dialog box appears, please enter the default user name "admin" and password “admin” (or the
username/password you have changed via console). The login screen in Figure 3-2 appears.
Default User name: admin
Default Password: admin
20
