Filter
Top Products
Chapter2 Hardware Installation
1. Make sure the power is OFF, then connect printer to the Print Server's printer port.
2. Connect the LAN cable to the RJ-45 port of the Print Server.
3. Connect the other end of the LAN cable to a switch or your PC directly.
4. Connect the supplied Power Adapter.
5. Please make sure the LAN LED is light on.
NOTE1: The wireless interface of FPS-1010G is “Disabled” by default. If you want to
activate wireless interface, please refer to section 7.10 Wireless to know more information
for how to setup wireless interface.
NOTE2: MUST use the power adapter shipped with the print server, do NOT use any other
power adapter from any sources.
NOTE3: To prevent the compatibility problem between print server and a few printer, it is
recommended that you power on the print server before the printer.
NOTE4: Please be sure your printer is not a host-base printer. This kind of printer must be
connected to a PC directly, so they cannot work with Print Server. You may check
the printer specification or the GDI Printer List in our bundle CD to know this
printer can work with FPS-1010G or not.