Filter
Top Products
8.4.3 TCP/IP
You can configure the print server to automatically obtain an IP addddress from your LAN DHCP
server or manually specify a static IP address.
If you need the print server to automatically get an IP from DHCP server, select “Enable Obtain
TCP/IP settings automatically”. Or you can select “Disable Use the following TCP/IP settings” to
manually assign IP Address, Subnet Mask and Gateway for the print server.
8.4.4 SMB
You may Enable/Disable the SMB Printing protocl of this print server. When this setting enable,
you have to enter the SMB Group Name, you should set this name as your network PCs
assigned. Then the PCs can find this printserver in Network Neighbor and attach to this print
server as a Network Printer.