Filter
Top Products
7.10 Wireless
Due to wireless interface is “Disable” in default. If you want to use the print server through
wireless interface, please set up the print server through Ethernet firstly and make sure your
wireless LAN settings are correct and Wireless Function is set to “Auto”. After configure the
wireless LAN settings, unplug the Ethernet cable and power off/on the print server, then you can
start to use the print server via wireless interface. If the wireless configuration does not work,
please plug the Ethernet cable again, restart the print server and configure the print server
through Ethernet until the wireless LAN settings are correct. When the Wireless interface work
correctly , if you don’t need to work with Ethernet interface, you may change the Wireless
Function to “Enable” to disable Ethernet interface.
You may select either Infrastructure Mode or Ad-hoc Mode for this printserver to join your
wireless network.
7.10.1 Infrastructure Mode
1. If you are select “Infrastructure Mode” and click “Next” in section 7.11, you will see the dialog
box below. You can select first option to scan your wireless network to search the Access
Point that you want to connected. Or you can select the second option and enter the SSID
you had known into the field. Please choose one of them and click “Next”.