Planet Technology FPS-1010G Printer User Manual


 
network by Ethernet cable when starting up, the print server will run in Ethernet mode. If the
print server is not connected to an active network by Ethernet cable when starting up, the
print server will run in wireless LAN mode. The print server default is in “Disable” mode.
Mode is the operation mode of wireless station. You can choose ether “Ad Hoc” or
“Infrastructure” mode. If you do not have any access point and want to use peer-to-peer
connection, you have to choose “Ad Hoc” mode. If you have an access point as the wireless
LAN infrastructure, you have to choose “Infrastructure” mode.
ESSID is the unique name identified by in a wireless LAN. The ID prevents the unintentional
merging of two co-located WLANs. Please make sure that the ESSID of all stations and
access points in the same WLAN network are the same.
Channel Number is the channel number of your wireless LAN. Please make sure that the
channel number of all stations and access points in the same WLAN network are the same.