Planet Technology FPS-1010G Printer User Manual


 
Port Name: The name of the printer port. Each printer port has to be assigned a name. The
printserver driver uses this name to access the printer port.
8.4.1.1 Advanced Settings
You can enable/disable the printing protocols from the screen. To enable the function, please
select “Enabled”; to disable the function, please select “Disabled”.
8.4.2 Wireless
If you want to use the print server through wireless LAN, please set up the print server
through Ethernet first and make sure your wireless LAN setting is correct. After setting the
wireless LAN, unplug the Ethernet cable and restart the print server, then you can start to use
the print server through wireless LAN. If the wireless configuration does not work, please plug
the Ethernet cable again, restart the print server and configure the print server through
Ethernet until the wireless LAN settings are correct.
8.4.2.1 General Setting
You can enable/disable the wireless function and set parameters that are used for the
wireless stations to connect to this print server from here. The parameters include “Function”,
“Mode”, “ESSID” and “Channel Number”. You can manually set the parameters of wireless
LAN in this page or use the “Site Survey” function to automatically search for an available
access point and associate with it.
Function is for user to disable, enable or let the print server auto select to connect to the
wired or wireless network. If “Disable” is selected, the print server can only connect to the
network through wired Ethernet. If “Enable” is selected, the print server can only connect to
the network through Wireless LAN. If “Auto” is selected, the print server can automatically
decide to enable or disable the wireless function. The print server only can work in ether
Ethernet or wireless LAN mode. It cannot work in both Ethernet and wireless LAN mode at
the same time. When the print server starts up, it will auto-detect if the LAN port is connected
to an active network by an Ethernet cable. If the print server is connected to an active