Filter
Top Products
Rear Panel
IAD-200
IAD-200W
Figure 3: Rear Panel
ADSL port
Connect this port to your ADSL line.
PSTN
Connect this to your PSTN line (normal analog phone line).
Phone
Connect a standard phone here.
LAN
Connect this port to your hub, using the supplied LAN cable.
Reset Button
(Reset to Defaults)
This button will reset the IAD-200 / IAD-200W to the factory default
settings.
To do this, press and hold the Reset Button for five (5) seconds, until
the Status LED is lit, then release the Reset Button, and wait the
IAD-200 / IAD-200W to restart using the factory default values.
Power switch
Press IN for power ON, OUT for power OFF.
Power port
Connect the supplied power adapter here.
7