Filter
Top Products
SIP register
port
Enter the port used for "Register" connections to the Server above.
Register
Expiry Time
This sets the "Idle Timeout" for the SIP Server Login. An Idle connec-
tion will be terminated after this time period. Enter the desired value.
User Name
Enter the login name for connections to the SIP Server.
Password
Enter the password associated with the login name above.
Telephone
Number
Enter the telephone number provided to you by the VoIP Service pro-
vider. If you have a range of numbers, enter the number you wish to use
for this line.
Display Name
This name is used by the SIP Server, and may be visible to callers.
For the comparable issue, you should set up the same voice codec and packet size
on the IAD-200/200W and your IP phone.
VoIP Status Screen
This screen allows you to check the status of the connection to the SIP Server. It is accessed
via the VoIP link on the Advanced menu. A sample screen is shown below.
Figure 54: VoIP Status Screen
VoIP Status
Line 1
VoIP Status
This indicates if VoIP is enabled or disabled.
Line Status
Sometimes called "Hook Status"; this indicates the status on the
telephone line. ON indicates the receiver is "on-the-hook", while
OFF indicates the receiver is "off-the-hook".
69