Filter
Top Products
Figure 18: Windows NT4.0 - IP Address
3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify
an IP Address, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this is recommended. By default, the IAD-200 /
IAD-200W will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the IAD-200 / IAD-200W.
Specify an IP Address
If your PC is already configured, check with your network administrator before making the
following changes.
1. The Default Gateway must be set to the IP address of the IAD-200 / IAD-200W. To set
this:
• Click the Advanced button on the screen above.
• On the following screen, click the Add button in the Gateways panel, and enter the
IAD-200 / IAD-200W's IP address, as shown in Figure 19 below.
• If necessary, use the Up button to make the IAD-200 / IAD-200W the first entry in
the Gateways list.
29