Filter
Top Products
Figure 24: TCP/IP Properties (Windows XP)
5. Ensure your TCP/IP settings are correct.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows setting. Using this is recommended. By default, the IAD-200 / IAD-200W will act
as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the IAD-200 / IAD-200W.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the
following changes.
• In the Default gateway field, enter the IAD-200 / IAD-200W's IP address and click OK.
Your LAN administrator can advise you of the IP Address they assigned to the IAD-200 /
IAD-200W.
• If the DNS Server fields are empty, select Use the following DNS server addresses, and
enter the DNS address or addresses provided by your ISP, then click OK.
34