Filter
Top Products
Security Configuration
63
Access Control
If enabled, the log will include attempted outgoing connec-
tions which have been blocked by the "Access Control"
feature.
Firewall Rules
If enabled, the log will details of packets blocked by user-
defined Firewall rules. Logging can be set for each rule
individually. Only rules which have logging enabled will be
included.
VPN
If enabled, the VPN log will record incoming and outgoing
VPN connections.
Timezone
Select the correct Timezone for your location. This is re-
quired for the date/time shown on the logs to be correct.
E-Mail Logs
Send E-mail alert
If enabled, an E-mail will be sent immediately if a DoS
(Denial of Service) attack is detected. If enabled, the E-mail
address information must be provided.
E-mail Logs
You can choose to have the logs E-mailed to you, by ena-
bling either or both checkboxes. If enabled, the Log will sent
to the specified E-mail address. The interval between E-
mails is determined by the "Send" setting.
Send
Select the desired option for sending the log by E-mail.
• When log is full - The time is not fixed. The log will be
sent when the log is full, which will depend on the vol-
ume of traffic.
• Every day, Every Monday ... - The log is sent on the
interval specified.
• If "Every day" is selected, the log is sent at the time
specified.
• If the day is specified, the log is sent once per
week, on the specified day.
• Select the time of day you wish the E-mail to be
sent.
• If the log is full before the time specified to send it, it
will be sent regardless of the day and time speci-
fied.
E-mail Address
Enter the E-mail address the Log is to be sent to. The E-
mail will also show this address as the Sender's address.
Subject
Enter the text string to be shown in the "Subject" field for the
E-mail.
SMTP Server
Enter the address or IP address of the SMTP (Simple Mail
Transport Protocol) Server you use for outgoing E-mail.
Port No.
Enter the port number used to connect to the SMTP Server.
The default value is 25.
Syslog Server
Enable Syslog
If enabled, log data will be sent to your Syslog Server.
Syslog Server
Enter the IP address of your Syslog Server.