Filter
Top Products
VPN
83
Examples
This section describes some examples of using VRT-401 in common VPN situations.
Example 1: Connecting 2 VRT-401s
In this example, 2 LANs are connected via VPN.
Figure 53: Connecting 2 VRT-401s
Note
• The LANs MUST use different IP address ranges.
• Both endpoints have fixed WAN (Internet) IP addresses.
Configuration Settings
Setting LAN A Gateway
LAN B Gateway
Notes
Name Policy 1 Policy 1 Name does not affect
operation. Select a
meaningful name.
Remote Endpoint 205.17.11.43 202.11.13.211 Other endpoint's WAN
(Internet) IP address.
Local
IP addresses
Any Any Use a more restrictive
definition if possible.
Remote
IP addresses
192.168.1.1 to
192.168.1.254
192.168.0.1 to
192.168.0.254
Address range on other
endpoint.
Use a more restrictive
definition if possible.
Key Exchange IKE IKE Must match
IKE SA Parameters
IKE Direction Both ways Both ways Does not have to match.
Either endpoint can
block 1 direction.
Local Identity IP address IP address IP address is the most
common ID method
Remote Identity IP address IP address IP address is the most
common ID method
IKE Authentica-
tion method
Pre-shared Key Pre-shared Key Certificates are not
widely used.