Filter
Top Products
VRT-401 User Manual
76
• Otherwise, click Next to continue. You will see a screen like the following.
Figure 48: VPN Wizard - General
General Settings
Policy Name
Enter a suitable name. This name is not supplied to the remote
VPN. It is used only to help you manage the policies.
Enable Policy
Enable or disable the policy as required. For each remote VPN,
only 1 policy can be enabled at any time.
Remote VPN
Endpoint
The Internet IP address of the remote VPN endpoint (Gateway or
client).
• Dynamic. Select this if the Internet IP address is unknown. In
this case, only incoming connections are possible.
• Fixed. Select this if the remote endpoint has a fixed Internet IP
address.
Keys
Select Manually assigned or IKE (Internet Key Exchange) as
required.
If you are setting up both endpoints, using IKE is recommended.
2. Click Next to continue. You will see a screen like the following: