Filter
Top Products
E-50
Setup
Presentation Timer
The presentation is given while checking the timer displayed on the
screen.
The gauge display allows the remaining time to be known at a glance.
Select the item name “Presentation Timer” and select the setting contents
with the SELECT (̇̈) buttons.
Setting contents: Off, 10 min., 20 min., 30 min., 40 min., 50 min., 60 min.
To start the timer...
Press the MENU button and open the menu.
The timer display will appear at the lower right and the timer will start.
• Press the ENTER button to restart the timer. The timer will start with the
same time setting.
• Press the CANCEL button to close the timer display. The timer setting will
return to “Off”.
Moving the Position of the Timer Display
The SELECT (̆̄̇̈) buttons on the remote control permit movement within
the movable range of the timer display.
The blue gauge indicates the remaining time. When the gauge disappears,the
time is up.
The gauge continues to be displayed when the timer is stopped.
Gauge (Blue)
[Timer Display]
When the remaining time is
“0” (Gray)
Note:
* The timer display will be closed while the menu or the quick menu is displayed, and while a message is displayed; however, the timer will
still be operating at such times. Also, the timer will not be displayed unless a signal is being input.
* While the presentation timer is being displayed, screen movement will not be possible in the zoom mode.
Movable Range of the Timer Display
Volume
This function adjusts the volume of the built-in speaker.
Select the item name [Volume] and adjust the sound level with the SELECT
(̇̈) buttons.